|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Website Tools
and Hosting
|
|
|
|
Polaris Ranger Razor Crew, Yamaha Rhino, Kawasaki Teryx Mule, Arctic Cat Prowler, Cub Cadet Volunteer Tracker
|
|
|
|
|
|
|
|
Hello and welcome to EZ Turn Signal Kits
|
|
|
|
|
|
|
Hello, my name is Cisco Folk and I am the President of EZ Website Builders here in Glendale, AZ. My passion is the outdoors and I purchased a 2006 Polaris Ranger to help me get around. After a few years of using the old, hang your arm out the side to signal on coming traffic, I decided I had enough. I wanted to install LED turn signals for my added safety. When I tried to purchase the LED turn signals, I was unable to find anyone who had a 4 LED Turn Signal Kit. I found one that was 4 regular bulbs and another that was 2 LED's and 2 regular bulbs. But, as we all know the UTV's have small batteries and low charging systems. The main reasons why I wanted all 4 turn signal lights to be LED are:
- Less current draw, resulting in increased battery & alternator life while allowing more power for other vehicle requirments.
- Faster illumination offers significant safety benefits for following drivers to react quicker, resulting in an average of three foot reaction time advantage for every 10 miles per hour.
- LEDs have no filament, therefore are not susceptible to shock & vibration, a major cause of failure for lamps with incandescent bulbs.
|
|
|
So, I created my own LED Turn Signal Kit. I wanted good looking, clean and crisp LED lights, ones that were very visible, even during the day. The LED Lights in my kit are not only 16 light emitting diodes each, but they are hard wired with encapsulated electronics to eliminate corrosion. They have both the black (+) and white (-) wires to make a great connection, no screw through a metal surface to the frame for ground. You can hard wire the lights to both positive and ground, so you always have a great connection.
|
|
|
|
The Turn Signal Switch is heavy duty, has the right and left turn signals along with a pull out flare tab for the 4-way emergency (hazard warring) flashers. I added an 18" black ground wire with ring tong connector, this easily installs using one of the mounting screws that holds the turn signal switch to your steering column. This makes a great ground, so you don't have to scrape on your new recreational vehicle steering column.
I have designed and developed a custom mounting strap for the 2009 Polaris Ranger XP and HD models. This professional looking mount will allow clearance for the tilt steering wheel. I have seen several turn signal switches out there that come with a hose clamp, not this company. You will always get good looking, high quality turn signals from EZ Turn Signal Kits!
|
|
The LED Electronic Flasher is the key to the entire kit. After spending countless hours and using dozens of electronic flashers, I finally found the right one. This special LED electronic flasher is also quiet, no annoying clicking sounds.
I was the first to develop and market the LED Turn Signal Kits, for all of the UTV side-by-sides! These kits can be easily installed on any side-by-side, UTV, Golf Cart, Kubota, Bobcat, Argo, Gator XUV, Sand Car, Dune Buggy, etc.
|
|
|
|
|
This LED Turn Signal Kit will fit all years for the Polaris Ranger (see note below), Razor and Crew, all years for the Yamaha Rhino, all years for the Kawasaki Teryx and Mule, all years for the Arctic Cat Prowler and all years for the Cub Cadet Volunteer Tracker. This kit can be easily installed on any Side-by-Side, UTV, Golf Cart, Bobcat, Kubota, Argo, Gator, Club Car, Sand Car, etc.
Note: The 09 Polaris Ranger XP & HD both use our custom Turn Signal Switch mounting strap. Order from the drop down box (BELOW) b) TurnSignal Switch: 09 Ranger XP/HD Mounting Strap
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) LED lights. The 4 LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights, an added 18" ground wire (for better grounding of the turn signal switch) and the hardware to mount it to your steering column.
The four LED Lights are 4”x 2” rectangular with 16 (LED) Light Emitting Diodes each, polycarbonate lens & housing and hard wired with encapsulated electronics to eliminate corrosion.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER. This special electronic LED flasher is also quite, no annoying clicking sounds.
The kit includes: 2 Amber and 2 Red LED lights, the Turn Signal Switch with an extra 18” ground wire with ring tong connector (for better grounding of the turn signal switch) and the hardware to mount it to your steering column, the special LED Electronic Flasher, an in-line fuse holder, a 3 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
I supply the major quality components and hardware to mount them; you supply the color wire and connectors you want to use. This kit was originally developed for my 2006 Polaris Ranger XP and my customers have installed their kits on the Polaris Ranger XP / HD, Razor (RZR) and Crew, the Yamaha Rhino, the Arctic Cat Prowler, the Kawasaki Mule and Teryx, and the Cub Cadet Volunteer Tracker. This kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Bobcat, Kubota, Argo, Gator, Club Car, Sand Car, Dune Buggy, etc.
The local dealer charges $360 to install a kit with only 2 LED lights and 2 Bulb lights. You can install my 4 LED lights, turn signal switch, special LED electronic flasher, and save hundreds of dollars. This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .32 amps - that's less than a third of an amp with the four hazard lights on!
|
|
|
|
|
|
|
|
2 - Amber 4" x 2" LED Lights
2 - Red 4" x 2" LED Lights
1 - Turn Signal Switch w/hardware
1 - 18" Black Ground Wire (switch)
|
|
1 - LED Electronic Flasher
1 - In-line ATC Fuse Holder
1 - ATC Type 3 Amp Fuse
|
|
9 - Self Taping Screws for mounting
..... LED Lights & Electronic Flasher
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
 
|
LED Parking Lights
& Turn Signal Kit
|
|
LED Parking Lights
& Turn Signal Kit
|
|
|
This LED Parking Lights & Turn Signal Kit will fit all years for the Polaris Ranger (see note below), Razor and Crew, all years for the Yamaha Rhino, all years for the Kawasaki Teryx and Mule, all years for the Arctic Cat Prowler and all years for the Cub Cadet Volunteer Tracker. This kit can be easily installed on any Side-by-Side, UTV, Golf Cart, Bobcat, Kubota, Argo, Gator, Club Car, Sand Car, etc.
Note: The 09 Polaris Ranger XP & HD both use our custom Turn Signal Switch mounting strap. Order from the drop down box (BELOW) b) TurnSignal Switch: 09 Ranger XP/HD Mounting Strap
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt LED Parking Lights and Turn Signal Kit with 2 Amber (front) and 2 Red (rear) Dual Mode LED lights. The 4 Dual Mode LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights, an added 18" ground wire (for better grounding of the turn signal switch) and the hardware to mount it to your steering column.
The four Dual Mode LED Lights are 4”x 2” rectangular with 12 Colored (red or amber) Light Emitting Diodes each. They are chrome based, come with both clear & colored lenses and are hard wired with encapsulated electronics to eliminate corrosion. They have 3 lead wires each, one for ground, normal mode (parking lights) and high mode (turn signals), which is equal to 24 LED’s on high mode.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER. This special electronic LED flasher is also quite, no annoying clicking sounds.
The Parking Light Switch is a LED illuminated rocker switch and is easy to install, vibration resistance, and will illuminate when turned on.
The kit includes: 2 Amber and 2 Red Dual Mode LED lights with both colored and clear lenses, the Turn Signal Switch with an extra 18” ground wire with ring tong connector (for better grounding of the turn signal switch) and the hardware to mount it to your steering column, the special LED Electronic Flasher, the LED illuminated rocker switch for parking lights, an in-line fuse holder, a 3 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
I supply the major quality components and hardware to mount them; you supply the color wire and connectors you want to use. This kit was originally developed for my 2009 Polaris Ranger XP and my customers have installed their kits on the Polaris Ranger XP / HD, Razor (RZR) and Crew, the Yamaha Rhino, the Arctic Cat Prowler, the Kawasaki Mule and Teryx, and the Cub Cadet Volunteer Tracker. This kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Bobcat, Kubota, Argo, Gator, Club Car, Sand Car, Dune Buggy, etc.
The local dealer charges $360 to install a kit with only 2 LED lights and 2 Bulb lights, and has NO parking lights. You can install my 4 Dual Mode LED lights, turn signal switch, special LED electronic flasher, LED illuminated rocker switch and save hundreds of dollars. This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .84 amps - that's less than an amp with the four parking and hazard lights on!
|
|
|
|
|
|
|
|
2 - Amber 4" x 2" Dual LED Lights
2 - Red 4" x 2" Dual LED Lights
1 - Turn Signal Switch w/hardware
1 - 18" Black Ground Wire (switch)
|
|
1 - LED Electronic Flasher
1 - In-line ATC Fuse Holder
1 - ATC Type 3 Amp Fuse
1 - LED Rocker Switch
|
|
9 - Self Taping Screws for mounting
..... LED Lights & Electronic Flasher
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
Regular Bulb Turn Signal Kit
|
|
|
Regular Bulb Turn Signal Kit
|
|
|
This Regular Bulb Turn Signal Kit will fit all years for the Polaris Ranger (see note below), Razor and Crew, all years for the Yamaha Rhino, all years for the Kawasaki Teryx and Mule, all years for the Arctic Cat Prowler and all years for the Cub Cadet Volunteer Tracker. This kit can be easily installed on any Side-by-Side, UTV, Golf Cart, Bobcat, Kubota, Argo, Gator, Club Car, Sand Car, etc.
Note: The 09 Polaris Ranger XP & HD both use our custom Turn Signal Switch mounting strap. Order from the drop down box (BELOW) b) TurnSignal Switch: 09 Ranger XP/HD Mounting Strap
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt Regular Bulb Turn Signal Kit with 2 Amber (front) and 2 Red (rear) lights. The 4 Regular Bulb light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights, an added 18" ground wire (for better grounding of the turn signal switch) and the hardware to mount it to your steering column.
The four Regular Bulb Lights are 4”x 2” rectangular with (2) bulbs each, they have two stainless steel grounds, corrosion-resistant contacts, lubricated fleet service bulbs, corrosion-proof body; they come with 4 extra ground wires and 8 self tapping screws for mounting.
The Bulb Flasher has the 3 pin connections for LOAD, PILOT and POWER. This flasher comes with a clamp and a self tapping screw for mounting.
The kit includes: 2 Amber and 2 Red Regular Bulb lights, 4 ground wires with ring tong connectors (for grounding the regular lights), the Turn Signal Switch with an extra 18” ground wire with ring tong connector (for better grounding of the turn signal switch) and the hardware to mount it to your steering column, the Flasher with mounting clamp, an in-line fuse holder, a 5 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
I supply the major quality components and hardware to mount them; you supply the color wire and connectors you want to use. My customers have installed their kits on the Polaris Ranger XP / HD, Razor (RZR) and Crew, the Yamaha Rhino, the Arctic Cat Prowler, the Kawasaki Mule and Teryx, and the Cub Cadet Volunteer Tracker. This kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Bobcat, Kubota, Argo, Gator, Club Car, Sand Car, Dune Buggy, etc.
The local dealer charges $360 to install a kit. You can install my Regular Bulb Turn Signal Kit and save hundreds of dollars. This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: 2.65 amps with the four hazard lights on!
|
|
|
|
|
|
|
2 - Amber 4" x 2" REG Bulb Lights
2 - Red 4" x 2" REG Bulb Lights
1 - Turn Signal Switch w/hardware
1 - 18" Black Ground Wire (switch)
|
|
1 - Regular Flasher w/clamp
1 - In-line ATC Fuse Holder
1 - ATC Type 5 Amp Fuse
4 - 10" White Ground Wires
|
|
9 - Self Taping Screws for mounting
..... Regular Bulb Lights & Flasher
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Phone: (623) 435-1337
|
|
|
|
|
|
|
|
|
