header graphic

EZ Turn Signal Kits

separator

The original "LED Turn Signal Kit" was developed by Cisco Folk and encouraged by his friends and family to share with the country. With the feedback from all the customers, Cisco decided to develop an inexpensive "Regular Turn Signal Kit" (bulb lights) and a dual functioning "LED Parking Lights & Turn Signal Kit". Now you have a choice of the "LED Turn Signal Kit", the "LED Parking Lights & Turn Signal Kit" or the "Regular Turn Signal Kit"?

SM LED Turn Signal Kit
left_img This is a 12 volt Surface Mount LED Turn Signal Kit with 2 Surface Mounted inch Amber (front) and 2 Surface Mounted inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The SM LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.

The 4 Surface Mounted LED super bright lights are inch round with an attached rubber grommet for quick mounting. They are surface mounted LEDs with a slim-line design for mounting in small spaces (no brackets required). These SM LEDs are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.

The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.

The kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.

This kit can be easily installed, you dont need any brackets for mounting lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.

This kit was originally developed for the Polaris RZR line and the Ranger Mid-size line. My customers have installed their kits on the Polaris Ranger EV, XP, HD, HO, Deluxe, 6x6, Diesel, 400, 500, 570, 700, 800, 900, RZR, S, 4, 570, 800, 900, 1000, XP, XP-4, XC, Turbo and Crew models, the Yamaha Rhino models, the Can-Am Commander, Maverick, Max and X3 models, the Honda Big Red MUV models, the Kawasaki Mule & Teryx models, and the Arctic Cat Prowler & Wildcat models. This kit can be easily installed on any 12 volt Side-by-Side UTV, Golf Cart, Sand Car, Dune Buggy, etc.

This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
Price: $129.95 Stock #: 104
a) Light Options:
b) TurnSignal Switch:
f) Wire & Connectors:
g) Dash Indicators:
Qty:
LED Turn Signal Kit
left_img This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) LED lights. The 4 LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.

The 4 LED lights are 4x 2 rectangular with 16 (LED) Light Emitting Diodes each, polycarbonate lens & housing and hard wired with encapsulated electronics to eliminate corrosion. Also, you can substitute the rear 4"x2" lights for the 3/4" LED lights to add a custom look.

The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.

The kit includes: 2 Amber and 2 Red LED lights, the Turn Signal Switch, the Special LED Electronic Flasher, an ATC in-line fuse holder, a 3 amp fuse and 9 screws for mounting lights and flasher.

This kit can be easily installed and comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.

This kit was originally developed for my 2006 Polaris Ranger XP and my customers have installed their kits on the Polaris Ranger XP, HD, HO, Deluxe, 6x6, Diesel, 500, 700, 800, 900, Razor (RZR / S / 4 / 570 / 800 / 900 / 1000 / XP / XP-4 / XC / Turbo) and Crew models, the Yamaha Rhino models, the Can-Am Commander, Maverick, Max and X3 models, the Honda Big Red MUV models, the Kawasaki Mule & Teryx models and the Arctic Cat Prowler & Wildcat models. This kit can be easily installed on any Side-by-Side UTV, Golf Cart, Club Car, Sand Car, Dune Buggy, etc.

You can install my 4 LED lights, turn signal switch, special LED electronic flasher, and save hundreds of dollars. This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
Price: $149.95 Stock #: 105
a) Light Options:
b) TurnSignal Switch:
c) Front Brackets:
d) Rear Brackets:
f) Wire & Connectors:
g) Dash Indicators:
Qty:
SM LED Running Lights & Turn Signal Kit
left_img This is a 12 volt SM LED Running Lights & Turn Signal Kit with 2 Amber (front) and 2 Red (rear) Dual Mode LED lights. The 4 SM Dual Mode LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights.

The 4 SM Dual Mode LED lights are inch round with 3 Super Bright (red or amber) Light Emitting Diodes (LED) each. They are hard wired with encapsulated electronics to eliminate corrosion. They have 3 lead wires each, one for ground, normal mode (running lights) and high mode (turn signals).

The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.

The Running Light Switch is a LED illuminated rocker switch and is easy to install, vibration resistance, and will illuminate when turned on.

The kit includes: 2 Amber and 2 Red SM Dual Mode LED lights, the Turn Signal Switch, the Special LED Electronic Flasher, the LED illuminated rocker switch for running lights, an ATC in-line fuse holder, a 3 amp fuse and the wiring diagram and instructions.

This kit can be easily installed, it does not go into any factory wiring, and its a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.

This kit was originally developed for my Polaris Ranger and my customers have installed their kits on the Polaris Ranger XP, HD, HO, Deluxe, 6x6, Diesel, the Razor (RZR) and Crew models, the Yamaha Rhino models, the Can-Am Commander, Maverick, Max and X3 models, the Honda Big Red MUV models, the Arctic Cat Prowler & Wildcat models, the Kawasaki Mule & Teryx models, and the Cub Cadet Volunteer Tracker. This kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Club Car, Sand Car, Dune Buggy, etc.

This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for their added safety.
Price: $169.95 Stock #: 107-SM
a) Light Options:
b) TurnSignal Switch:
f) Wire & Connectors:
g) Dash Indicators:
Qty:
TS UTV / ATV LED Turn Signal Kit
left_img This is a 12 volt Toggle Switch UTV / ATV LED Turn Signal Kit with 2 Surface Mounted inch Amber (front) and 2 Surface Mounted inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The TS UTV / ATV LED turn signal kit comes with two toggle switches and LED indicator lights for the turn signals and 4-way emergency flashers (hazard warning).

The 4 SM LED super bright lights are inch round with an attached rubber grommet for quick mounting. They are surface mounted LEDs with a slim-line design for mounting in small spaces (no brackets required). These SM LEDs are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.

The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.

The kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets, the 2 Toggle Switches and 2 LED indicator lights for the turn signals and 4-way emergency flashers, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.

This kit can be easily installed, you dont need any brackets for mounting the switches or lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.

This kit was originally developed for ATVs and can be used on UTVs too. My customers have installed their kits on the Polaris Sportsman, Magnum, Hawkeye, Trail Boss, RZR, S, 4, 570, 800, 900, 1000, XP, XP-4, XC, Trail, Turbo & High Lifter, the Yamaha Viking, Wolverine, YXZ, Grizzly & Kodiak, the Kawasaki Brute Force, Bayou, Prairie, Teryx, Mule Pro & Mule SX, the Can-Am Defender & Outlander, the Honda Pioneer, Rancher, Foreman, Rubicon, Rincon, FourTrax & Recon, the Suzuki KingQuad, Vinson & Eiger, the John Deere RSX 850i, and the Arctic Cat Wildcat, Prowler, Stampede, MudPro, Diesel & ThunderCat. This kit can be easily installed on any 12 volt ATV Quad, UTV Side-by-Side, Golf Cart, Club Car, Sand Car, Dune Buggy, etc.

The turn signal toggle switches are very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for their added safety.
Price: $89.95 Stock #: 604
a) Light Options:
f) Wire & Connectors:
Qty: